Device settings
DeviceDevice Name
| Parameter Name | Parameter Range | Parameter Definition |
| Full Name | Not Available | Full name is used on the drop-down selection lists and in the Dante Controller for Dante channels. Full name is also used as device/Bluetooth name on the NWP series. |
| Short Name | Not Available | Short is used on the overview screen channel labels |
Version
| Parameter Name | Parameter Range | Parameter Definition |
| Firmware Version | Not Available | Indicates the installed firmware version. |
| Build Number | Not Available | Indicates the build number of the installed firmware version. |
| Update Firmware | Not Available | The available firmware version can be installed here. Both the latest and previous versions are available. Using the latest AUDAC Touch version and firmware is highly recommended to get the most out of your Atellio family devices. When a new firmware version is available, the button will be highlighted in orange. |
Network Settings
| Parameter Name | Parameter Range | Parameter Definition |
| DHCP | Enable/Disable | Switch between dynamic or static IP |
| MAC | Not Available | MAC address of the device |
| IP | Not Available | The IP address of the device can be set here when DHCP is disabled (e.g. 192.168.20.170) |
| Mask | Not Available | The subnet mask can be set here (e.g. 255.255.255.0) |
| Gateway | Not Available | The gateway IP address can be set here for the device that provides access to other networks, such as a router or Layer 3 gateway (e.g., 192.168.20.1). |
| DNS1/DNS2 | Not Available | The primary and secondary/alternative DNS addresses can be set here (e.g. 1.1.1.1) |
Device Address
| Parameter Name | Parameter Range | Parameter Definition |
| Index | Enable/Disable | You can set a unique number to the device in a scenario where you have more than one of the same device. |
Button Sensitivity
| Parameter Name | Parameter Range | Parameter Definition |
| Button Sensitivity | 0-100 | The sensitivity of programmable buttons can be set individually. |