Available parameters
DashboardThe following table shows the main dashboard configuration parameters. Buttons and push rotary can be configured by clicking on them.
| Parameter Name | Parameter Range | Parameter Definition |
| Button | Not Available | The NCP105 has 4 programmable buttons. You can program each button by clicking them on the dashboard menu. The programming is no different than creating a widget. Up to 8 layers can be created and programmed in the NCP105. You can select NCP105(SELF) as the device and change the active layer. The first layer has the number 0. |
| Rotary | Not Available | The NCP105 has a single push rotary button. You can program it by clicking them on the dashboard menu. The programming is no different than creating a widget. Assigning the volume function of a zone also yields the mute/unmute function by pushing. |
| Plus Icon | Not Available | Up to 8 layers can be created and programmed in the NCP105 by clicking the plus icon. |
| Bin Icon | Not Available | Unwanted layers can be deleted using the bin icon. |
| Save Button | Not Available | The save button will be highlighted in green after every change in the configuration of the NCP105. The 360 LED indicator should spin in white after pressing the save button. |
The following table shows the actions available for volume in the input block and mixer channels in the zone block.
| Parameter Name | Parameter Range | Parameter Definition |
| Up | Not Available | Increases the volume. |
| Down | Not Available | Decreases the volume. |
| Fixed | Not Available | Sets the volume value to a desired value. |
The following table shows the actions available for mute in the input block and mixer channels in the zone block.
| Parameter Name | Parameter Range | Parameter Definition |
| Toggle | Not Available | Toggles between mute and unmute. |
| Fixed | Not Available | Sets the value to the desired value, mute or unmute. |
The following table shows the actions available for the route in the mixer of the zone block. You can cycle up, down or go to a fixed source, one of the 16 mapped sources to a zone. When the source is routed, the routed source gets the 0dB value on the mixer where the rest is set to -90dB. It is also possible to add one of the eight scenes to that cycle or fixed value. In addition, you can add Off mode to the cycle.
| Parameter Name | Parameter Range | Parameter Definition |
| Cycle Up | Not Available | Previous source |
| Cycle Down | Not Available | Next source |
| Fixed | Not Available | Sets the source to a desired one. |