Full name is used on the drop-down selection lists and in the Dante Controller for Dante channels. Full name is also used as device/Bluetooth name on the NWP series.
Short Name
Not Available
Short is used on the overview screen channel labels
Version
Parameter Name
Parameter Range
Parameter Definition
Firmware Version
Not Available
Indicates the installed firmware version.
Build Number
Not Available
Indicates the build number of the installed firmware version.
Update Firmware
Not Available
The available firmware version can be installed here. The latest and previous versions are both available. Using the latest AUDAC Touch version and firmware is highly recommended to get the most out of your Atellio family devices. When a new firmware version is available, the button will be highlighted in orange.
Target Devices Settings
Parameter Name
Parameter Range
Parameter Definition
Target Devices
Not Available
Up to 20 devices can be set as target devices for paging and voice file announcements.
Target Device
Selection
Selecting any LUNA series in the device inventory from the drop-down list is possible.
Paging Input
Selection
Selected device channels should be subscribed to the dedicated NPM200 Dante channels, Dante Paging Out for paging and Dante Voice File Out for voice files.
Voice File Input
Selection
Selected device channels should be subscribed to the dedicated NPM200 Dante channels, Dante Paging Out for paging and Dante Voice File Out for voice files.
Physical Button Settings
Parameter Name
Parameter Range
Parameter Definition
Physical Button Function
Selection
Provides two function options for the physical button of NPM200.
Push to start, release to stop
Not Available
Push the physical button to start the announcement and the microphone will unmute, you can release the physical button once the announcement is done and the microphone will mute.
Push once to start, again to stop
Not Available
Push the physical button to start the announcement and the microphone will unmute, you can push again to the physical button once the announcement is done and the microphone will mute.
Network Settings
Parameter Name
Parameter Range
Parameter Definition
DHCP
Enable/Disable
Switch between dynamic or static IP
MAC
Not Available
MAC address of the device
IP
Not Available
The IP address of the device can be set here when DHCP is disabled (e.g. 192.168.20.170)
Mask
Not Available
The subnet mask can be set here (e.g. 255.255.255.0)
Gateway
Not Available
The gateway IP address can be set here for the devices that act as the bridge for the network traffic like the network switch (e.g. 192.168.20.1)
DNS1/DNS2
Not Available
The primary and secondary/alternative DNS addresses can be set here (e.g. 1.1.1.1)
Device Address
Parameter Name
Parameter Range
Parameter Definition
Index
Enable/Disable
You can set a unique number to the device in a scenario where you have more than one of the same device.
Pin Code Setting
A 4-digit PIN code prevents unauthorised persons from accessing the update and factory reset menu. This feature is available with firmware version 1.2.0. The pin code is 0000 by default.
The PIN code can be configured on Audac Touch, under the "Device" menu. When a 4-digit PIN code is entered the “Submit” button is highlighted in green. Clicking on the button sets the PIN code.
On the NPM200, clicking the gear icon opens the PIN code panel. The PIN code automatically unlocks if the typed 4-digit PIN code is correct. If the typed PIN code is incorrect, the “Wrong PIN code, try again!” message is displayed on top.
Parameter Name
Parameter Range
Parameter Definition
Clear
Not Available
Clears the typed PIN code and displays the message "Please enter PIN code" on top
Back
Not Available
Returns to dashboard. The PIN code panel stays active if you do not press the ‘Back’ button.
