Legacy device support
DashboardThe NCP105 offers direct integration with our Consenso family products with AUDAC Touch version 2.13.0 and NCP105 firmware version 1.2.1, such as MTX series, MFA Series, AMP Series, VEXO Series, SMA/Q Series, and PMA/Q Series. Configure the NCP105 effortlessly in AUDAC Touch™ to control these products' input source selection and output volumes or mute without any ASCII commands.
Volume
Volume can be controlled using one of the programmable buttons or push rotary encoder.
The following table shows the actions available for volume in the zone/output when you want to control volume with one of the programmable buttons.
Parameter Name | Parameter Range | Parameter Definition |
Up | Not Available | Increases the volume. |
Down | Not Available | Decreases the volume. |
Fixed | Not Available | Sets the volume value to a desired value. |
Display color of both button and push rotary function can be customized from the Display tab. For details, please check Status Display chapter.
Mute
Mute can be controlled using one of the programmable buttons or push rotary encoder.
The following table shows the actions available for mute in the zone/output when you want to control mute with one of the programmable buttons.
Parameter Name | Parameter Range | Parameter Definition |
Toggle | Not Available | Toggles between mute and unmute. |
Fixed | Not Available | Sets the value to the desired value, mute or unmute. |
Display color of both button and push rotary function can be customized from the Display tab. For details, please check Status Display chapter.
Route
Route can be controlled using one of the programmable buttons or push rotary encoder.
The following table shows the actions available for the route in the mixer of the zone block. You can cycle up or down between sources available in the zone/output when you want to control sources with one of the programmable buttons.
Parameter Name | Parameter Range | Parameter Definition |
Cycle Up | Not Available | Previous source |
Cycle Down | Not Available | Next source |
Display color of both button and push rotary function can be customized from the Display tab. For details, please check Status Display chapter.
