Device settings

Device
Device Name

Parameter Name

Parameter Range

Parameter Definition

Full Name

Not Available

Full name is used on the drop-down selection lists and in the Dante Controller for Dante channels.

 

Full name is also used as device/Bluetooth name on the NWP series.

 

Short Name

Not Available

Short is used on the overview screen channel labels
Version

Parameter Name

Parameter Range

Parameter Definition

Firmware Version

Not Available

Indicates the installed firmware version.

Build Number

Not Available

Indicates the build number of the installed firmware version.

Update Firmware

Not Available

The available firmware version can be installed here. Both the latest and previous versions are available. Using the latest AUDAC Touch version and firmware is highly recommended to get the most out of your Atellio family devices.

When a new firmware version is available, the button will be highlighted in orange.

Network Settings

Parameter Name

Parameter Range

Parameter Definition

DHCP

Enable/Disable

Switch between dynamic or static IP

MAC

Not Available

MAC address of the device

IP

Not Available

The IP address of the device can be set here when DHCP is disabled (e.g. 192.168.20.170)

Mask

Not Available

The subnet mask can be set here (e.g. 255.255.255.0)

Gateway

Not Available

The gateway IP address can be set here for the devices that act as the bridge for the network traffic like the network switch (e.g. 192.168.20.1)

DNS1/DNS2

Not Available

The primary and secondary/alternative DNS addresses can be set here (e.g. 1.1.1.1)
Device Address

Parameter Name

Parameter Range

Parameter Definition

Index

Enable/Disable

You can set a unique number to the device in a scenario where you have more than one of the same device.

Button Sensitivity

Parameter Name

Parameter Range

Parameter Definition

Button Sensitivity

0-100

The sensitivity of programmable buttons can be set individually.

 
Top